hot spots (influence of cavity position)
Initial sample/small batch for function test
ONE SOLUTION - MANY ADVANTAGES
Technology
FLM Frech Laser Melting
Our diecasting machines are characterized by a high degree of product safety. One component is the use of FRECH Laser Melting technology.
FRECH Laser Melting technology is generally more cost-effective than conventional methods, particularly when producing single pieces or complex parts/series with low quantities or low material input.
- Close-contour components
Service components
- Max. component dimensions 280 x 280 x 350
- Channels up to Ø 0.5 mm can be produced (if possible greater than Ø 3 mm)
- No internal overhangs flatter than 30° are possible for technical reasons (round is no problem)
- If technically possible, the component can be hybrid-produced
- Temperature control must be connected to the heating and cooling unit
FRECH LASER MELTING
FLM
Your benefits
Improvement of overall equipment effectiveness through:
68 %
Avoiding
45%
Reduction
of cooling time
53%
Extending
service life of components
36%
Cost savings
for hybrid production
CLOSE-CONTOUR COMPONENTS
FLM
Project phases
- Prototypea AISi10Mg
Service components
- Max. component dimensions 280 x 280 x 350
- Component accuracy according to DIN/ISO 2768 - 1m possible, more precise areas must be mechanically reworked
FRECH LASER MELTING
AlSi10Mg
Your benefits
Fast & cost-effective production
Resource-conservative process in comparison to machining production processes
High degree of geometrical freedom in component design
PROTOTYPES AISi10Mg
