As an alternative to new, we can also offer you repaired, partially overhauled or completely overhauled second hand machines.


Are you looking for a used hot or cold chamber diecasting machine?

It's your decision! Frech can offer you a huge variety of second hand machines with a maximum in terms of quality, competence and sound advice - worldwide! An actual list of available second hand machines can be found here.

The second hand machines are on display in their original condition and can be repaired, overhauled or modernised according to your specific requests. Plus, since the buying and selling of used machinery is always a matter of trust, all our machines are thoroughly tested prior to dispatch.

    1

We know our diecasting machines in detail and are ready to share this know-how with our customers. But at the end of the day it is up to you to decide what condition of machine would benefit you the most in terms of economy and which technical features you require for your production. Your main criteria should be:

  • Production purpose
  • Project lifetime
  • Budgett

Our subsidiary in Solingen is your partner for machine overhauls and second hand machines. Contact them or your nearest Frech Sales Office for assistance.

Contact: 
Tel: 
Fax: 
email: 

Mr. Matthias Fitzner
+49 (0)212-26228-17
+49 (0)212-26228-26
info@frech.com


An actual list of available second hand machines can be found here.

    1

1

Repair

This includes at a minimum:

  • Cleaning of the machine
  • Check of safety features
  • Repair of malfunctions within the machine
  • Repair of machine guarding and covers
  • Repair of the original machine paint
  • Final test run of the machine for several hours with test report

1

Partial overhaul

This can mean for example:

  • Cleaning of the machine
  • Disassembly of the locking unit
  • Renewal of bushes, tie bars, tie bar nuts and seals
  • Overhaul of the closing cylinder
  • New ejector cylinder
  • Repair of the lubrication system
  • Assembly and adjustment of the locking unit
  • Overhaul and new seals of the tear-off cylinder (hot chamber machines)
  • Overhaul and new seals for the shot positioning cylinder of the injection unit (cold chamber machines)
  • New hydraulic hoses
  • Check of safety features
  • Repair of machine guarding and covers
  • Repair of the original machine paint
  • Final test run of the machine for several hours with test report
  • Six months warranty on the locking unit and on the hydraulic cylinders

1

Complete overhaul

This comprises at a minimum of:

  • Cleaning and sand blasting of the machine
  • Disassembly of the locking unit
  • Renewal of bushes, tie bars, tie bar nuts and seals
  • Overhaul of the closing cylinder
  • New ejector cylinder
  • Repair of the lubrication system
  • Assembly and adjustment of the locking unit
  • Overhaul and new seals of the tear-off cylinder (hot chamber machines)
  • Overhaul and new seals for the shot positioning cylinder of the injection unit (cold chamber machines)
  • New hydraulic pump and overhaul of the motor
  • New hydraulic hoses
  • New hydraulic valves
  • Overhaul of the hydraulic manifolds
  • Repair and cleaning of the hydraulic pipes
  • New electrical installation including new cables and new limit switches
  • New, state-of-the-art control cabinet
  • Check of safety features
  • New machine guarding and covers to modern CE safety standards
  • New machine painting
  • Final test run of the machine for several hours with test report
  • Acceptance test with CE-approval
  • Six months warranty on the whole machine