Cold Chamber Diecasting Machines
Frech offers cold-chamber diecasting machines with locking forces between 2,750 kN and 52,000 kN, used for casting smaller purchased parts as well as engine blocks and transmission housings, not to mention chassis and body components made from aluminium or magnesium alloys. Thanks to its patented Vacural technology, Frech is a world leader in manufacturing engineering for lightweight designs.
For special requirements, we are at your disposal for any questions.
Please don't hesitate to contact
us.
The following machine series are available:
DAK 250 - 1600
Frech cold chamber technology is setting trends for pressure tight
and porosity free diecast objects. In close cooperation with our
customers we have specially developed the M-series machine range
to suit the growing demands of the market.
The advantages of the modular Frech cold chamber M-series machine
range are:
- Increased productivity through faster cycle-times
- Best possible casting quality with the highest injection speeds
- Complete flexibility for retrofits and automation due to the
modular design
- Combination possibilities for different shot ends and locking-units
for the most optimised process
- Optional L-version available with even larger machine platens
- Service-friendly with good access to all areas and the ability
for remote service
- High durability and lifetime due to stable and robust machine
construction
The modular Frech cold chamber M-series machine range is available
in locking-forces from nominal 2,500 kN up to 16,000 kN.
The machines of the M-series are:
- DAK 250
- DAK 350
- DAK 450
- DAK 580
- DAK 720
- DAK 880
|
|
- DAK 1100 (+ L-Version)
- DAK 1250 (+ L-Version)
- DAK 1400 (+ L-Version)
- DAK 1600 (+ L-Version)
|
|
|
 |
| Your contact person is Mrs. Christine
Münzberg |
| Tel: |
+49 (0)7181-702-427 |
| Fax: |
+49 (0)7181-702-444 |
GDK 2000 - 5000
Our GDK machines with closing forces of nominal 20,000 to 50,000 kN set the standard for leading technology that places immense emphasis on customer requirements.
We believe our core expertise lies not only in the construction of diecasting machines, but also in the elaboration of solutions to specific problems, ranging from the individual diecasting machine to complete diecasting cells and fully equipped turnkey foundries including moulds.
Having worked on numerous projects over many years, we have created an immense pool of know-how. This means we are able to provide you with expert assistance for the engineering of complex plant solutions as well as application-specific advice for optimising your casting process. |
|
 |
GDK 2000, GDK 2500, GDK 2800, GDK 3500, GDK 4100, GDK 5000
| Your contact person is Mrs. Christine
Münzberg |
| Tel: |
+49 (0)7181-702-427 |
| Fax: |
+49 (0)7181-702-444 |
DualCast 2300 - 4000
The innovative diecasting machine with reliable control technology, high performance shot end and new closing unit design. All in robust Frech quality to meet future challenges.
- Reduced floor space
- Reduction of operating cost
- Increase in tie bar clerance
- Increase of maschine performance and reduced cycle time
- Convenient operation of core pulls
- Flexible arrangement of furnace / dosing systems
- Improved die clamping
- Straightforward die height adjustment
- Reduced setup time
- Innovative control concept
|
|
 |
DualCast 2300, DualCast 2700, DualCast 3200, DualCast 4000
| Your contact person is Mrs. Christine
Münzberg |
| Tel: |
+49 (0)7181-702-427 |
| Fax: |
+49 (0)7181-702-444 |
Vacural Technologie
The patented Vacural process is a tried-and-trusted method that has been used for many years to produce castings with an extremely low level of gas and oxide inclusions. The process allows the reliable production of
- highly ductile structural and chassis components
- thin-walled, weldable chassis components
- coatable surface parts
The extremely low level of gas inclusions in castings produced using VACURAL technology enables the mechanical properties of the part to be changed by means of heat treatment after casting.
In this way it is possible to ensure high static and dynamic stability as well as high ductility.
|
|
|
| Your contact person is Mrs. Christine
Münzberg |
| Tel: |
+49 (0)7181-702-427 |
| Fax: |
+49 (0)7181-702-444 |
|
